Find LED Circuit Board Indicator, Circuit Board Indicator, 3mm Single Circuit Board Indicator on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Humidity Indicator Card > 3mm Red Diffused LED Circuit Board Indicator

3mm Red Diffused LED Circuit Board Indicator

  • 3mm Red Diffused LED Circuit Board Indicator
  • 3mm Red Diffused LED Circuit Board Indicator
  • 3mm Red Diffused LED Circuit Board Indicator
  • 3mm Red Diffused LED Circuit Board Indicator

3mm Red Diffused LED Circuit Board Indicator

    Payment Type: T/T,Paypal,Western Union
    Terms of Trade: FOB,EXW,FCA
    Min. Order: 10000 Piece/Pieces
    Delivery Time: 5-7 Business Days
    Packaging: Carton box
    Productivity: 1000000000 pcs/week
    Brand: Best LED
    Transportation: Ocean,Land,Air
    Place of Origin: China
    Supply Ability: 7000000000 pcs/week
    Certificate: GB/T19001-2008/ISO9001:2008
    HS Code: 8541401000
    Port: SHENZHEN

Basic Info

Model No.: 312URD-3.5HK

Product Description

3mm Red Diffused LED Single Level Circuit Board Indicator

This circuit board indicator are acutally made by 3mm red through-hole LED inside and cover with a black case that can bent the LED pins as right angle. We finished the red LED lamps at first, and then we need to install this red LED(625nm LED) into the black plastic case. In this circuit board indicator, we produce this red through-hole LED inside as a red diffused lens, which can make this emitting light be more soft and easy to see directly. But if you don't want this red diffused lens, it's also available in clear lens, milky lens ect. On the other hand, this LED are also available in different colors, which is widely use in diagnostic, industrial equipement and data storage application. Less PC board space needed, height and spacing alignment saves assemnly cost. If you are interested in this 312URD-3.5HK right angle LED circuit board indicator, just feel free to contact us for more information~

312URD-3.5HK Red LED Single level circuit board indicator


Size of LED circuit board indicator:

312URD-3.5HK 3mm Red LED Single level circuit board indicator

Notes:

1, All dimensons are in millimeters;

2, Tolerance is ±0.10mm unless otherwise ntoed;


3,590nm LED(Yellow), 520nm LED(Green) or 470nm LED (Blue) are also available in this case.



Absolute Maximum Ratings(Tc=25℃)


Parameter

Symbol

Rating

Unit

Power Dissipation

Pd

105

mw

Pulse Forward Current

IFP

100

mA

Forward Current

IF

≤30

mA

Reverse Voltage

VR

5

V

Junction Temperature

Tj

100

Operating Temperature

Topr

-40 - +80

Storage Temperature

Tstg

-40 - +100

Soldering Temperature

Tsol

260

Electro-Stati-Discharge(HBM)

ESD

2000

V

Service lige under normal conditions

Time

80000

H

Warranty

Time

2

Years

Antistatic bag

Piece

1000

Back

*Pulse forward current confition: Duty 1% and Pulse width=10us.

*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃


Electrical Optical Characteristics(Tc=25)


Parameter Symbol Min Typ Max Unit Test Condition
Forward voltage VF 1.8 1.9 2.4 V IF=20mA
Luminous Intensity IV 300
500 mcd IF=20mA
Peak Wavelength λP

633
nm IF=20mA
Dominant Wavelength λd
620 625 630 nm IF=20mA
Half Width λ

12
nm IF=20mA
Viewing Half Angle 2θ1/2
±22

deg IF=20mA
Revers Current IR

5 uA VR=5V
*Luminous Intensity is measured by ZWL600;

*θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity;


Main application:

*Diagnostic or panel status indicator;

*Industrial equipment;

*Data storage equipment;

Red LED application

Detail:

This red through-hole LED are made with Gap material chip, which have high reliability, high radiant intensity;

With pure gole wilre, famous branded, high quality epoxy and high quality LED frame. This LED circuit board indicator will wor perfectly for your project!

Through-hole LED detail


Precautions:

1, A moisture barrier bag(MBB)containing LEDS shall be kept in an environment with temperature below40C and humidity below 90% RH. A MBB shall be kept sealed until the LEDS contained in that bag are to be used immediately.Storge in an environment with temperature 5-30 C and humidity below 60% RH

2. After a MBB has been opened, all LEDS contained in that bag shall complete soldering process withinaccording to the conditions listed on the Best LED MBB.

3. If the 10% spot of a Humidity Indicator Card (HIC)indicates wet, LEDS shall be baked according tothe conditions listed on the Best LED MBB.

4. During soldering, component covers and holders should leave clearance to avoid placing damagingstress on the LED during soldering.


Right Angle LED Circuit Board Indicator


5 . The tip of the soldering iron should never touch the lens epoxy

6 . After soldering , allow at least three minutes for the component to cool down to room temperature before further operations

7 . If the LED will undergo multiple soldering passes or face other processes where the part may be subjected to intense heat , please check with Best LED for compatibility

8 . Recommended Reflow Soldering Profiles For SMD Housing LEDS;

Single color right angle LEDs


Notes:

1, We recommend the reflow temperature 245℃(±5℃). The maximum soldering temperature should be limited to 260℃.

2, Don't cause stress to the epoxy resin whilte it is expossed to high tempreature.

3, Recommended solder: Sn/Cu/Ag;

4, No more than once;

Shenzhen Best LED Opto-electronic Co.,Ltd

 

An Experienced High-tech LED and LED Components Manufacturer

SHENZHEN BEST LED OPTOELECTRONIC CO.,LTD is a professional high quality LED manufacturer with 18 years of experience.The product families offered are SMD LED, Thru-hole LED, IR LED, UV LED and Custom modules. We established a long-term strategic partnership with Cree, Osram, Epistar, Tyntek and ED. All of our products come with RoHS, EN62471, CE, SVHC and FCC mark to fully comply with international standards.


Equipped by Fully-automatic and Micro-Computer Machines

We have fully-automatic and micro-computer machines from the US, Taiwan and Japan, such as automatic dispensing robot dispenser, automatic die-bonder, automatic LED sorting machine, auto-taping machine and automatic wire bonder. In addition, all employees combine to be a pragmatic and creative team. Therefore, we can make up to 56 million pieces output every month.


Employing Technical Research and Engineering Team

Our factory is located in Dongguan, which covers an approximate area of 2,100 square meters and more than 200 skilled employees work with us. Those professional technicians, high quality raw materials and updated technology not only can make our operations comply to ISO 9001:2008, but enable us to build models specific to each client`s design needs. Place Orders Now We have no MOQ requirement. Rigorous working attitude, absolute quality and perfect service are our constant aim. Contact us today.

Company Info

  • Company Name: Shenzhen Best LED Opto-electronic Co.,Ltd
  • Representative: ZhangFuqin
  • Product/Service: SMD LED , IR LED , Through-hole LED , RGB LED , Flashing LED , High-power LED
  • Capital (Million US $): 500000
  • Year Established: 1998
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 61% - 70%
  • Total Annual Purchase Volume (Million US $): US$50 Million - US$100 Million
  • No. of Production Lines: 12
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Building No. 1 Lane 1 Liuwu Nanlian The Fifth Industry Area , Longgang, Shenzhen, Guangdong, China. 518116
  • Contact Person: Ms. ZhangFuqin
  • Tel: 86-0755-89752405
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters